Information

Important information and warnings

DELETE	Windows function, e.g. Delete
<xxxxxx>	Syntax for placeholders. Placeholders are written between < > characters.
>>	Reference to a further chapter or document.
	The representation refers only to a part of the user interface.

In the interest of our clientele, we reserve the right to make changes due to technical advances. Therefore, schematics, descriptions and scope of delivery may be changed without prior notice. This manual is valid as of version 2017.

Liability

In no event shall ELPRO-BUCHS AG be liable for any direct, indirect, special, incidental, consequential or punitive damages or losses, including lost profits and data, arising out of the use of your data loggers, sensors, accessories, software products or the information contained in the documentation.
ELPRO-BUCHS AG does not bear any responsibility for the installation of the software products.
ELPRO-BUCHS AG makes no warranties of any kind, express or implied, regarding the merchantability and fitness of your products for any particular purpose.
In the interest of our clientele, we reserve the right to make changes and discontinuations due to technical advances. Therefore functionality, schemes, descriptions and scope of delivery can be changed without prior notice!
Because some countries or states do not allow the limitation of the term implied warranty or disclaimer of incidental or consequential damages, the limitations and exclusions may not apply to every purchaser. If any provision of this warranty is held invalid or unenforceable by a court of competent jurisdiction, it will not affect the validity or enforceability of the remaining provisions.
ELPRO-BUCHS AG accepts no liability for transport damage or any consequential damage resulting therefrom.
In general, the legal provisions of Switzerland apply. The place of jurisdiction is the district court of Werdenberg-Sarganserland.

Warranty

The warranty obligations are limited, at ELPRO-BUCHS AG's discretion, to the repair, refund of the purchase price, repair free of charge or replacement of a defective product returned to ELPRO-BUCHS AG or a reseller approved by ELPRO-BUCHS AG within the warranty period.
There is no entitlement to free "on-site customer support" by an employee of ELPRO-BUCHS AG.
The warranty extends only to the original purchaser or end user and customers of a reseller authorized by ELPRO-BUCHS AG.
Resellers approved by ELPRO-BUCHS AG are not authorized to provide a greater or other warranty on behalf of ELPROBUCHS AG.
ELPRO-BUCHS AG grants a warranty period of 24 months on the following new products:
- Data logger
- Brackets
- Accessories, except sensors and third-party products
This warranty applies to material defects or production defects.
ELPRO-BUCHS AG grants a warranty period of 6 months for the following products and services:
- All service work and repairs
- Temperature sensors
- Humidity sensors
ELPRO-BUCHS AG grants a warranty period of 90 days that the medium on which the software product was delivered is free from defects in material and workmanship under normal conditions. The software product conforms in all material respects to the operating instructions and the information in the help file.
The warranty does not apply to consumables, disposable batteries or any other product which, in the opinion of ELPRO-BUCHS Ltd:
- abused
- changed
- replaced by a wrong product
- has been operated and damaged outside the specification due to accident or operating or handling conditions.
Wear and tear, cable breakage and corrosion cannot be claimed under warranty.
For third-party products, ELPRO-BUCHS AG grants at most the warranty period of the manufacturer.
For discontinued products, ELPRO-BUCHS AG provides warranty work and customer support only for a limited period of time.
Warranty repairs are generally only carried out at the factory (ELPRO-BUCHS AG) or at an agency recognized by the factory.
ELPRO-BUCHS AG does not provide any warranty regarding the standard or SCS calibration of the data loggers and sensors. The specified data correspond to the situation during the calibration process

Software

The software products of ELPRO-BUCHS AG are subject to internal quality regulations and are regularly validated within the factory. In the event of any program errors, bypassing the error is considered as elimination.
Software operating instructions do not contain instructions on the basic operation of a computer or on basic functions of the Windows® operating system. For information on how to operate your computer or operating system, please refer to the appropriate manuals for your computer.

Data loggers, sensors and accessories

ELPRO-BUCHS AG uses the highest quality standards and a certified quality management system according to ISO 9001 for the production of data loggers and their accessories.
For information on the operation of the data loggers and their accessories, please refer to the corresponding product documentation provided by ELPRO-BUCHS AG.
When installing data loggers, sensors and accessories, the locally applicable installation regulations must be observed.
For applications in potentially explosive atmospheres, the zone assignment specified by ELPRO-BUCHS AG as well as the application and safety instructions must be strictly observed.
In the event of a warranty claim, the customer will receive a repair cost estimate from ELPRO-BUCHS AG in order to issue the appropriate authorization before work commences.
The transport costs for a repair at ELPRO-BUCHS AG will be borne by the customer. DAP (value added tax) will be borne by ELPROBUCHS AG.
ELPRO-BUCHS AG reserves the right to charge the purchaser for costs of repairs/parts replacement.
After repair, the product will be returned to the buyer with return shipping charges billed to the buyer (FOB shipping location).

Trademark

All listed company and product names and their trademarks are the protected property of their respective owners.

CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE ETSI / FCC APPROVAL TO OPERATE THIS PRODUCT. THIS PRODUCT COMPLIES WITH PART 15 OF THE FCC REGULATIONS AND RSS-210 INDUSTRY CANADA. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THE PROUDUCT MUST NOT CAUSE HARMFUL INTERFERENCE. (2) THE PROUDUCT MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

	This product is subject to CE marking. The manufacturer guarantees the conformity of this product to the corresponding directives: EN 61000-6-2 : 2001 and EN 61000-6-4 : 2001
	FCC ID: Z45-E11645398 IC: 9954A-E11645398
	This product must be disposed of in accordance with WEEE (Waste electrical and electronic equipment, 2002/ 96/EC)!

- 1.1 Liability
- 1.2 Warranty
- 1.3 Software
- 1.4 Data loggers, sensors and accessories
- 1.5 Trademark
2 1. Overview Register Floorplans
- 2.1 1.1 Create an individual floorplan
- 2.2 1.2 Editing floorplans and add sensors

1. Overview Register Floorplans

This register is used for adding efficiently individual floorplans, which indepedently can be configured.

The register will be visible and editable when the following permissions are activated in elproUSER for elproMONITOR:

Section 1: Is showing the created floorplans.

Section 2: Type in the Search… box to filter floorplans by name. Clear the box to return to the full list.

Section 3: Click + FLOORPLAN to create an individual floorplan.

1.1 Create an individual floorplan

After clicking the + FLOORPLAN the create new floorplan dialog window will open.

Floorplan name *
Enter a clear, unique floorplan name.
Floorplan image *
Upload a floorplan image.
Allowed formats: PNG, JPG.
Maximum size: 10 MB and maximum name length of 150 symbols.

Uploading the image as follows:

Click Click to Upload and select the file, or
Drag and drop the file into the dashed area.

Buttons

CANCEL – Close the dialog without saving.
CREATE – Save the new floorplan. The button activates after all required fields are valid.

Example

1.2 Editing floorplans and add sensors

Select one of the different floorplans and the following window will appear:

Dropdown for fast switching between floorplans.
Live-Status included date and time.
Edit Mode for editing the floorplan and add sensors.
Quicklink for sharing of the floorplan (additional using it on a widescreen for visual monitoring purposes).

Open the QuickLink always in a private or different internet browser. Otherwise it is needed to logout and login again to see the full environment.

Adding Sensors

By clicking the Edit Mode button the following window will appear:

Sensor overview, with search function and group filtering
- Adding sensors to the floorplan by drag and drop to the individual location.
- By clicking again on the sensor (in the floorplan) the deletion button will appear or use the sensor overview as following:

Directly in the floorplan	In the sensor overview

Directly in the floorplan	In the sensor overview

Changing of sensor appearance
- Adjust the sensor size and showing sensor details (Note: if not toggled on, there is the possiblity to see the sensor details by hovering over the sensor)
Set the opacity of the floorplan
Possiblity to toggle on Grayscale for the whole floorplan
Edit Mode for further editing

Examples

Using the hovering over a sensor to visualize the value and status of it. Deactivated sensors are showing in an outgrayed color.

Activated Show sensor details - Arrange the icons with this setting

Hovering over a sensor with upper limit warning

elproMONITOR Floorplans (EN)