Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Expand
titleNavigation

Page Tree
root@home
startDepth0

Expand
titleBenutzte Symbole und Bezeichnungsschlüssel
Info

Information

Note

Important information and warnings

DELETE

Windows function, e.g. Delete

<xxxxxxxx>

Syntax for placeholders. Placeholders are written between < > characters.

>>

Reference to a further chapter or document.

The illustration only refers to a part of the user interface.

Info

In the interest of our customers, we reserve the right to make changes due to technical progress. Schematics, descriptions and scope of delivery may therefore be changed without prior notice. This manual is valid from version 2017.

Expand
titleBeschränkte Garantie und Haftungsbeschränkungen

Liability

  • In no event shall ELPRO-BUCHS AG be liable for any direct, indirect, special, incidental, consequential or punitive damages or losses, including lost profits and data, arising out of the use of your data loggers, sensors, accessories, software products or the information contained in the documentation.

  • ELPRO-BUCHS AG is not responsible for the installation of the software products.

  • ELPRO-BUCHS AG makes no warranties, express or implied, as to the merchantability and fitness for a particular purpose of its products.

  • In the interest of our customers, we reserve the right to make changes and discontinuations due to technical progress. For this reason, functionality, schematics, descriptions and scope of delivery may be changed without prior notice!

  • Because some countries or states do not allow the limitation of the term of an implied warranty or disclaimer of incidental or consequential damages, the limitations and exclusions may not apply to every buyer. If any provision of this warranty is held by a court of competent jurisdiction to be invalid or unenforceable, the validity or enforceability of the remaining provisions shall not be affected.

  • ELPRO-BUCHS AG accepts no liability for transport damage or any consequential damage.

  • In general, the legal provisions of Switzerland apply. The place of jurisdiction is the district court of Werdenberg-Sarganserland.

Guarantee

  • The warranty obligations are limited, at the discretion of ELPRO-BUCHS AG, to rectification, refund of the purchase price, free repair or replacement of a defective product that has been returned to ELPRO-BUCHS AG or a reseller authorized by ELPRO-BUCHS AG within the warranty period.

  • There is no entitlement to free "on-site customer support" by an employee of ELPRO-BUCHS AG.

  • The warranty extends only to the original purchaser or end user and customers of a reseller authorized by ELPRO-BUCHS AG.

  • Resellers authorized by ELPRO-BUCHS AG are not entitled to provide a greater or other guarantee on behalf of ELPRO-BUCHS AG.

  • ELPRO-BUCHS AG grants a warranty period of 24 months on the following new products:

    • Data logger

    • Brackets

    • Accessories, excluding sensors and third-party products

  • This guarantee applies to material defects or production faults.

  • ELPRO-BUCHS AG grants a warranty period of 6 months for the following products and services:

    • All service work and repairs

    • Temperature sensors

    • Humidity sensors

  • ELPRO-BUCHS AG grants a warranty period of 90 days that the medium on which the software product was delivered is free from defects in material and workmanship under normal conditions. The software product complies in all material respects with the operating instructions and the information in the help file.

  • The warranty does not apply to consumables, disposable batteries or any other product which, in the opinion of ELPRO-BUCHS AG:

    • abused

    • changed

    • replaced by an incorrect product

    • has been operated and damaged due to accident or operating or handling conditions outside the specification.

  • Wear and tear, cable breakage and corrosion cannot be claimed under warranty.

  • For third-party products, ELPRO-BUCHS AG grants a maximum of the manufacturer's warranty period.

  • ELPRO-BUCHS AG only provides warranty work and customer support for discontinued products for a limited period of time.

  • Warranty repairs are only carried out at the factory (ELPRO-BUCHS AG) or at an agency recognized by the factory.

  • ELPRO-BUCHS AG does not guarantee the standard or SCS calibration of the data loggers and sensors. The specified data correspond to the situation during the calibration process

Software

  • The software products of ELPRO-BUCHS AG are subject to internal quality regulations and are regularly validated in the factory. In the event of any program errors, a workaround of the error is deemed to be rectification.

  • Software operating instructions do not contain instructions on the basic operation of a computer or the basic functions of the Windows® operating system. For information on operating your computer or operating system, please refer to the relevant manuals for your computer.

Data loggers, sensors and accessories

  • ELPRO-BUCHS AG applies the highest quality standards and ISO 9001 certified quality management in the manufacture of data loggers and their accessories.

  • For information on operating the data loggers and their accessories, please refer to the relevant product documentation provided by ELPRO-BUCHS AG.

  • The locally applicable installation regulations must be observed when installing data loggers, sensors and accessories.

  • For applications in potentially explosive atmospheres, the zone allocation specified by ELPRO-BUCHS AG and the application and safety instructions must be observed.

  • In the event of a warranty claim, the customer will receive a repair cost estimate from ELPRO-BUCHS AG in order to issue a corresponding authorization before work begins.

  • The transportation costs for a repair at ELPRO-BUCHS AG are borne by the customer. DAP (value added tax) is borne by ELPRO-BUCHS AG.

  • ELPRO-BUCHS AG reserves the right to charge the buyer for repair/part replacement costs.

  • After repair, the product will be returned to the buyer, with return shipping costs charged to the buyer (FOB shipping location).

Trademark

  • All listed company and product names and their trademarks are the protected property of their respective owners

Note

CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE ETSI / FCC AUTHORIZATION TO OPERATE THIS PRODUCT. THIS PRODUCT COMPLIES WITH PART 15 OF THE FCC REGULATIONS AND RSS-210 INDUSTRY CANADA. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS PRODUCT MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS PRODUCT MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Drawio
zoom1
simple1
inComment0
pageId365199388
custContentId483885060
lbox0
diagramDisplayNameCE-Kennzeichen.drawio
contentVer1
revision1
baseUrlhttps://elproag.atlassian.net/wiki
diagramNameCE-Kennzeichen.drawio
pCenter1
width70.41
links
tbstyle
height51
  • This product is a product subject to CE marking.

  • The manufacturer guarantees the conformity of this product with the relevant directives: EN 61000-6-2 : 2001 and EN 61000-6-4 : 2001

Drawio
zoom1
simple1
inComment0
pageId365199388
custContentId483754001
lbox0
diagramDisplayNameFCC.drawio
hiResPreview0
contentVer1
revision1
baseUrlhttps://elproag.atlassian.net/wiki
diagramNameFCC.drawio
pCenter1
width72.11
links
tbstyle
height61
  • FCC ID: Z45-E11645398

  • IC: 9954A-E11645398

Drawio
zoom1
simple1
inComment0
pageId365199388
custContentId483885071
lbox0
diagramDisplayNameWEEE.drawio
contentVer1
revision1
baseUrlhttps://elproag.atlassian.net/wiki
diagramNameWEEE.drawio
pCenter1
width74.17
links
tbstyle
height101
  • This product must be disposed of in accordance with WEEE (Waste electrical and electronic equipment, 2002/96/EC)!

Expand
titleInhaltsverzeichnis
Table of Contents

1st measuring module T/rH - ECOLOG-PRO 2TH

Drawio
zoom1
simple1
inComment0
pageId365199388
custContentId483754037
lbox0
diagramDisplayNameECOLOG-PRO 2TH1.drawio
contentVer1
revision1
baseUrlhttps://elproag.atlassian.net/wiki
diagramNameECOLOG-PRO 2TH1.drawio
pCenter1
width493.55
links
tbstyle
height391

ECOLOG-PRO 4PT, art. no. 801424

Module

Measuring module for up to 2 T/rh sensors

ID number

The ID number is used to identify the module in elproMONITOR.

Status indicator 1; module activity

  • green; power supply ok

  • blue; system bus activity

Status indicator 2; sensor status

Condition

Description

dark

No channel configured

green

All configured sensors ok

red

Sensor error on one or more configured sensors

short dark

Measurement

Info

The display for the sensor status is updated at the recording interval!

System bus

  • Power supply for the connected measuring modules

  • Communication with the connected measuring modules

Connecting hook

Drawio
zoom1
simple1
inComment0
pageId365199388
custContentId484048929
lbox0
diagramDisplayNameECOLOG-PRO Verbindungshaken.drawio
contentVer1
revision1
baseUrlhttps://elproag.atlassian.net/wiki
diagramNameECOLOG-PRO Verbindungshaken.drawio
pCenter1
width142.96
links
tbstyle
height71

For a secure connection between the modules, they are fixed at the back with the connecting hook.

1.1 Device data

Feeding

Through internal system bus

Measuring range

Depending on the application, you can choose between 2 sensor variants:

Connection cable lengths

Recording interval

  • 1 minute..60 minutes

  • The two measured values temperature and humidity are recorded synchronously for each sensor. The interval for the two sensors together can be selected individually.

Date and time

  • Internal system clock

  • The internal system clock is permanently synchronized with the elproMONITOR system time

Data security

  • Internal, non-volatile memory

  • If the network connection fails, the measured values are still recorded and temporarily stored in the internal memory

  • 10'000 measured values

Scope of delivery

  • Measuring module

  • Connecting hooks, see back of module

  • Info sheet

  • Validation certificate

  • The plug connectors for the sensor connection are not included in the scope of delivery.

1.2 Wiring diagram

The sensor connection is made via a 3-pin standardized plug connection, which is implemented on both the extension cables and the sensors.

Channel

Sensor

Measured value - connection type

CH1

Sensor 1

Temperature - electrolytic or capacitive sensor

CH2

Sensor 1

Humidity - electrolytic or capacitive sensor

CH3

Sensor 2

Temperature - electrolytic or capacitive sensor

CH4

Sensor 2

Humidity - electrolytic or capacitive sensor

Drawio
zoom1
simple1
inComment0
pageId365199388
custContentId491618317
lbox0
diagramDisplayNameECOLOG-PRO Anschlüsse 2TH.drawio
contentVer1
revision1
baseUrlhttps://elproag.atlassian.net/wiki
diagramNameECOLOG-PRO Anschlüsse 2TH.drawio
pCenter1
width495.46
links
tbstyle
height461

Clamp

Occupancy

1

Feeding

2

Signal

3

Mass