Power Supply Unit ECOLOG-PRO LBR
1. Power Supply Unit ECOLOG-PRO LBR
Power supply 1250mA, item number see Country version
Plug-in power supply
For power supply of the ECOLOG-PRO modules the power supply unit is connected to the communication module ECOLOG-PRO LBR.
A plug-in power supply unit is used as the standard power supply. For systems with a large number of modules and for the installation of the modules in a control cabinet, other power supplies and uninterruptible power supplies (UPS) are available.
Depending on the version, the plug-in power supplies are supplied with interchangeable, country-specific connectors for the AC input
1.1. Device Data
Input voltage
100 VAC..264 VAC, 50 Hz..60 Hz
Output Voltage
24 VDC ±5 %
Output Current
1250 mA max.
Dimensions
90 x 55 x 34 mm (L x W x H)
Connection Cable Length
1830 mm
Scope of Delivery
Power supply unit with connection cable and plug for connection to the module: ECOLOG-PRO LBR
Connector AC input
Info sheet
No connection of grounding possible, therefore a connected module ECOLOG-PRO 4PT can only be used with unshielded sensor cables up to 30 m length.
For shielded sensor cables the power supply unit article 802155 - PSU_24VDC_24W_DIN RAIL or 802149 - PSU_UPS_AKKUTEC 2402_24VDC_1.2Ah must be used. (see >>ECOLOG-PRO Accessories List)
1.2 Configuration Matrix
Module | Maximum Supply Current at 24 VDC |
---|---|
ECOLOG-PRO LBR | 65 mA |
ECOLOG-PRO 4PT | 25 mA |
ECOLOG-PRO 4MA | 175 mA |
ECOLOG-PRO 2TH | 20 mA |
ECOLOG-PRO 4DI | 175 mA |
ECOLOG-PRO 4DO | 25 mA |
THE SUM OF ALL MODULE CURRENTS MUST NOT EXCEED THE MAXIMUM VALUE OF THE POWER SUPPLY OR 2500MA!